AR 380 AGRAR | weycor by Atlas Weyhausen

AR 380 AGRAR – THE MANOEUVRABLE LITTLE ONE FOR THE YARD

weycor wheel loaders are more than the sum of their parts. They are a living passion. For the fascination of technology. For quality „Made in Germany“. The innovative spirit of the employees, the love of precision and the joy of powerful engine technology have now resulted in the new „AGRAR“ wheel loader generation - specially developed to meet the requirements of agriculture.

(1) Service weight may vary with different equipment. (2) Power output ISO 14396, exhaust gas aftertreatment according to EU 2016/1628. All technical data refer exclusively to the standard unit.

OPERATING DATA

Shovel capacity	0.5 m³
Track width	1,010 mm
Turning radius (outer bucket edge)	3,490 mm
Tear out force	3,850 daN
Torque (20 km/h version)	2,650 daN
Tipping load, straight	2,575 kg
Tipping load, articulated	2,252 kg
Lifting capacity at ground level	2,470 daN
Operating weight	3,500 kg

Differing data for use of pallet forks (3)

Static tipping load, straight and articulated	1,712 kg
Lifting capacity	1,369 daN
Payload 80% even surface(4)	1,370 kg
Payload 60% uneven surface(4)	1,027 kg

Sound level

Averaged sound power level LWA(5)	98.2 dB(A)
Guaranteed sound power level LWA(5)	99.0 dB(A)
Sound pressure level LPA(6)	82.0 dB(A)
Vibration values hand/arm/whole body vibration(7)	< 2.5/0.5 m/s²

(3) Loads must always be moved to the floor position. (4) According to ISO 8313 and EN 474-3. (5) According to 2000/14/EC and Annexes. (6) According to ISO 6396. (7) According to ISO 8041.

Bale Fork on AR 380 Agrar

Heightened back wall (+360 mm)
Upwardly foldable tines - for secure driving
Lift capacity: 1000 kg

Type	W (mm)	H (mm)	L (mm)	Weight (kg)
KBR9	784	1050	1100	100

FEATURES AND BENEFITS

Powerful drive

The weycor AR 380 wheel loader can be moved in two ways: in working gear from 0 to 6.5 km/h or in road gear with up to 20 km/h. Thereby 1st and 2nd hydraulic gear as well as forward / reverse travel under load are switchable. Shifting between forward / reverse and driving gears is done via the weycor joystick. The travel drive is controlled via the travel pedal and the separate inching pedal for optimally distribute the hydraulic power to the pushing and lifting forces.

Articulated pendulum joint

In weycor wheel loaders, we almost exclusively use robust, low-maintenance articulated swing joints in conjunction with rigid axles. With a rear swing of ±12° and an articulation angle of 40° on both sides, these ensure excellent off-road mobility, driving that is gentle on the ground, and extreme maneuverability. Due to the low center of gravity, weycor wheel loaders have high tipping stability even under extreme conditions.

Hoist

Proven weycor kinematics with high breakout forces and excellent lifting heights. Upwardly tapered loader beam for best visibility of the attachment. An extended linkage is optionally available.

Low center of gravity

Due to the low center of gravity, weycor wheel loaders have high tipping stability even under extreme conditions.

Hydraulic quick change device

The hydraulic quick-change system turns the wheel loader into an all-rounder and allows attachments to be changed in seconds. The tried-and-tested weycor kinematics ensure high breakout forces and excellent lifting heights. The upwardly tapered loader arm provides the best possible view of the attachment tool. Tools with Euro adapters can be accommodated by means of adapters.

Separate inch pedal

We are the only manufacturer to offer our weycor wheel loaders with a separate inching pedal. Unlike the combined brake/inching pedal, the risk of driving against the service brake is eliminated here. A generously dimensioned inching range enables sensitive distribution of the pushing and lifting forces. The result: less wear and fuel consumption.